高级检索

CuxNi3Fe1(x=4~12)合金的组织演变

Microstructure Evolution of CuxNi3Fe1(x=4~12) Alloys

  • 摘要: 研究了Cu-Ni-Fe系列合金中组织结构演变及其对性能的影响。本文固定Ni:Fe原子比为3:1, 连续改变Cu含量, 设计制备了CuxNi3Fe1 (x=4, 7, 9, 12) 系列合金, 并利用光学显微镜、扫描电子显微镜、X射线衍射仪、维氏硬度计、万能试验机、变温电阻仪对合金的表面形貌、物相结构、硬度、拉伸性能及电阻率进行了分析。结果表明:CuxNi3Fe1合金中主要的强化方式是调幅分解;随着Cu含量的增加, 调幅分解形成的富Ni-Fe逐渐减少, 合金的抗拉强度、屈服强度以及硬度都呈减小的趋势;编织板条状的组织因排列密度高, 表现出良好的耐蚀性;x为4、7和9的合金时效后有少量的γ'-Ni3Fe析出相, 对合金的硬度和拉伸性能影响不大, 但γ'-Ni3Fe相在500℃左右会发生分解, 导致电阻率略有下降;而x为12的合金时效后晶界上有大量α-Fe相析出。

     

    Abstract: In order to study the effect of the microstructure on the properties of Cu-Ni-Fe alloy, in the present paper, the CuxNi3Fe1 (x=4, 7, 9, 12) alloys with the fixed Ni:Fe atom ratio and varying Cu content were prepared.Then the composition and evolution of the phase were characterized by XRD and SEM.The results show that the spinodal decomposition is the main strengthening mechanism in these alloys.With the increase of Cu content, tensile strength, yield strength and hardness decreased due to the decreased of Ni-Fe riched phase.The lath-shaped precipitation showed better corrosion resistance owing to its high packing density.During the aging process of the CuxNi3Fe1 (x=4, 7, 9) alloys, a small amount of γ'-Ni3Fe was precipitated, which had no obviously effect on the properties of the alloy.The γ'-Ni3Fe phase decompose at about 500℃, resulting in a slight decrease in the resistivity.In addition, a large number of-Fe were precipitated in the grain boundaries when x=12.

     

/

返回文章
返回